Sterling 10 User Manual
Page: 4 RINS415-9
The Entry/Exit timer will start to countdown, after 30 seconds (default) the system will be armed.
If the Sterling hasn’t armed you may have requested for a different exit mode:
If Final Door is programmed:
The exit timer will sound and keep sounding until an Entry/Exit zone is opened and closed. After 7
seconds (default) the system will be armed.
If Push To Arm is programmed:
The exit timer will sound and keep sounding until a Push Button is pressed; once this is pressed the
panel will be armed after 7 seconds.
2.2 Silent Arming The Panel
If you wish to silent arm the Sterling 10, so the entry and exit timer is silent:
Press the key (on the ICON press the ) then the arm mode you require:
(for Arm Mode A),
(for Arm Mode B),
(for Arm Mode C) or
(for Arm Mode D).
The diagram below shows how to silent arm the Sterling 10 in Arm Mode A:
A dual tone will be heard on acceptance of the command, and another dual tone will be heard once
the entry time has timed out and the system is armed.
2.3 Arming the panel when the Mains Fails
Under normal operation the panel will indicate a fault condition if the AC supply is disconnected. It will
still be possible to arm and disarm the panel during a mains fail, unless disallowed by the engineer,
and no further action is required. Full functionality of the panel is available during a mains failure.
D
J
K
L
C
G
H
I
B
D
E
F
Sterling 10 User Manual
RINS415-9 Page: 17
3.7 Change Text (LCD only)
It is possible to change the text for the users, so you can easily determine the last person to
arm/disarm the panel (this will be displayed in the event log).
LCD Keypad
Press the key
Then the key and scroll to ‘CHANGE TEXT’
Press the key to accept.
The following will be displayed:
Use the scroll keys to display the change text options. You can change the following When the
required user is displayed the text can be changed by using the number keys 1 to 9:
Each key has been assigned three letters of the alphabet, and by pressing the key several times you
can scroll through the number and letter sequence.
To insert spaces between characters press the key twice. When the desired letter or number is
displayed use the and scroll keys to move between segments on the display and when the text
is complete press the key to accept, the dual tone will be heard on acceptance.
The key must be pressed or the text changes will not be accepted.
Use the key to scroll to ‘EXIT’
Press to accept.
Enter
Func
Enter
Func
Enter
Func
Enter
Func
Enter
Func
(25 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels